Before starting the settings, prepare a chart showing the channels, station names, and guide channels. When selecting the guide channel, press and hold [ , ] to scroll the screen up and down. The captions you enter are displayed when the channel is displayed and in the Direct Navigator screen. STEP 4 Set up to match your television and remote control. You do not have to change the setting when connected to a standard aspect television that is not compatible with progressive output page Test by turning on the television and changing channels.
Repeat the procedure until you find the code that allows correct operation. Change the remote control code on the main unit and the remote control the two must match if you place other Panasonic products close together. You cannot record or play continuously on two sides. DVD-R from other manufacturers may not be recorded or played due to the condition of the recording. The following chart indicates the differences. Select based upon what you require. You will need to eject the disc and turn it over.
It takes about 30 seconds for the unit to complete recording management information after recording finishes.
The unit switches to standby after about 6 hours in the stop mode. You can turn this feature off or change the time to 2 hours. Depending on the content being recorded, the recording times may become shorter than indicated. In this case use EP 6H mode. The unit automatically selects a recording rate between XP and EP 8H that will enable the recordings to fit in the available recording time on the disc with the best possible recording quality.
Press again to show the play and recording images. The unit sets the best possible picture quality that fits the recording within the remaining disc space.
As long as secondary audio that is recorded on the video cassette is not output on the unit in play, it is not recorded. REC Remaining. Almost all videos and DVD software on sale have been treated to prevent illegal copying.
Any software that has been so treated cannot be recorded using this unit. Program the timer recording manually and select the channel on the cable TV box or satellite receiver before the timer recording starts.
You can find these codes in TV listings in newspapers and magazines. Timer recording works even during play. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions.
Enter a new password. Dear customer Thank you for purchasing this product. Please keep this manual for future reference. Region number supported by this unit Region numbers are allocated to DVD players and software according to where they are sold.
Example: 1 ALL 1 2 4. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: pReorient or relocate the receiving antenna. Useful features Table of contents.
Instant recording You no longer need to search for empty disc space. Instant play There is no need to rewind or search forward. Chasing playback There is no need to wait until recording is complete. Simultaneous Recording and Playback While recording, you can play another video program that was recorded previously.
Time Slip During play and also while recording, you can jump to the scene you wish to view by specifying the skip time. Back cover. Accessories Please check and identify the supplied accessories. Do not use it with other equipment. Examples of causes of such losses are pA disc recorded and edited with this unit is played in a DVD recorder or computer disc drive manufactured by another company.
Start play page 22 Start recording page 16 Remote control signal sensor Stop page 16, 22 page 16, Connection for camcorder etc. When off: The disc prevents down-mixing so only the two front Timer recording indicator channels can be played.
Video cassette recorder Camcorder Other equipment. Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit. Before moving the unit, ensure the disc tray is empty. Failure to do so will risk severely damaging the disc and the unit. Connecting a television and VCR indicates included accessories.
Television When making this connection, ensure you connect the audio cables to the corresponding audio input terminals on the television. Do not connect the unit through a video cassette recorder Video signals fed through video cassette recorders will be affected by copyright protection systems and the picture will not be shown correctly on the television.
Television Television. Getting started RQT Connecting an amplifier or system component w Connection to a stereo amplifier w To enjoy multi-channel surround sound on DVD-Video. Preparation pTurn on the television and select the appropriate video input to suit the connections to this unit. Auto Channel Setting CH. When the unit is on and stopped Press and hold [ : CH] and [ 9 CH] on the main unit for about five seconds.
The unit turns off. Adding and deleting channels Add or delete channels if necessary channels are not set or unnecessary channels are set. Auto Channel Setting starts. This takes a few minutes. Nickelodeon 38 20 Enter channel 20 next to Guide Channel Look up the guide channels Write down all the stations for the stations in you can receive. Repeat steps 4 and 5 to enter other channels.
Channel captions You can give the preset captions, or manually enter new ones yourself. Set Up pChannels are only displayed if they contain a station and if Disc ABC preset captions have not been added. You can choose from the following captions. Repeat steps 4—6 to enter other channels.
When other Panasonic products respond to this remote control Change the remote control code on the main unit and the remote control the two must match if you place other Panasonic products close together. Re-writable discs pYou can record up to 16 hours [in EP 8H mode on double-sided disc.
DVD-R One time recording discs recordable until the disc is full p4. Revision 1. Available space does not increase after erasing. Play on other players n a2 n a3 a5 CPRM page 40 compatible discs only. MTS broadcast w Protection [RAM] Cartridge discs Recording broadcasts that allow n a5 V one copy With the write-protect tab in the protect position, you cannot record to, edit, or erase from the disc.
High fidelity music discs pPlayed on this unit in 2 channels. This may cause disc warping and un-balanced rotation, rendering it unusable.
Close the pDo not use scratch-proof protectors or covers. Play may be —Discs with exposed adhesive from removed stickers or labels impossible on some CD-R or CD-RW discs due to the condition of rented discs etc. So —Irregularly shaped discs, such as heart you may not always be able to control play as described in these shapes.
Discs that cannot be played pDo not place in the following areas: —In direct sunlight. Insert label-up. Insert fully so it clicks into place.
Data will not be overwritten. Recorded as 1 title until the position where stopped. Press again to restart recording. Title is not split into a separate title.
Off Timer The unit switches to standby after about 6 hours in the stop mode. Recording modes and approximate recording times Depending on the content being recorded, the recording times may become shorter than indicated. FR Flexible Recording Mode The unit automatically selects a recording rate between XP and EP 8H that will enable the recordings to fit in the available recording time on the disc with the best possible recording quality.
Stereo: Main audio stereo! No disc e. Time Slip indicator on the main unit lights. Play starts from 30 seconds previous. The current recording images. Recording television programs Refer to the control reference on page While stopped Press [F Rec]. Set recording time 3 Hour 00 Min. When you want to start recording. To stop recording partway Press [w]. Start play on the other equipment. Press [ q REC]. Recording starts. To skip unwanted parts Press [ ] to pause recording. Table Of Contents.
Quick Links. See also: Owner's Manual , Setup Manual. Thank you for purchasing this product. For optimum. Table of Contents. Previous Page. Next Page. Page 3: Table Of Contents Status messages However, discs that are finalized are compatible and can be played.
Likewise, the above also applies in a case where any type of repair is made to the unit including any other non-HDD related component. Before moving the unit, ensure the disc tray is empty. Page Included Accessories Store in a cool, dark place. This unit consumes a small amount of power, even when it is turned off [approx. Downloaded From Disc-Player. Page Television Operation Change the remote control code on the main unit and the remote television channel and change the television volume.
RQT inserted. To see programme Additional information programme name, programme duration, broadcast time, short information description is available for these Programmes with the programmes. In such cases, recording starts and finishes at times you set initially. Select the channel on the other equipment.
Recording starts. To skip unwanted parts Press [;] to pause recording. Press again to restart recording. Play speed is quicker than normal. The file list for the group appears.
You can record the input M 1: Monaural broadcast signal as it is. You cannot delete a picture during a Slide Show.
The title or the picture is deleted. FRI Rec time 4.
0コメント